Petro analytix is a division of Petro Technologies serving mid and downstream of petroleum industry, petro analytix is a unique distribution port of Stanhope seta entire product’s pool as well as PILODIST in Kingdom of Saudi Arabia, kingdom of Bahrain as well as other Countries.
Having Petro Analytix as dedicated sub-organization with dedicated resources will organize, control , integrate and strength the positioning and support of our brilliant Stanhope seta brand, on other hand it will be of great benefit to our whole customers to have ONE strong supportive organization as the focal point for sales and support of Stanhope seta products.

Accreditation

Petro Analytix is accredited firm by QMS to ISO 9001-2015 for the supply, support and Services of Petroleum Quality testing instrumentation.

About Stanhope-Seta

SETA is a worldwide benchmark for top quality test instrumentation that offer advanced performance, accuracy and reliability.
SETA quality control instruments are used for the measurement of flash point, vapour pressure, viscosity, penetration, contaminants and many other “quality” parameters.
As market leaders we manufacture more than 100 quality control instruments used to measure the physical characteristics that determine product quality and consistency.

About PILODIST

PILODIST® offers a long-established and extensive experience, supported by technical know-how and competence which originates from the world renowned company, founded by Mr. W.G.Fischer ; Today the Fischer family continues to support PILODIST giving the company a position of unrivalled excellence.
PILODIST is a German Quality leading world-wide manufacturer of units and systems for thermal separation used for research and development as well as quality control of various applications.all PILODIST crude oil distillation products are in full compliance with the international ASTM standards.

AFIDA - Advanced Fuel Ignition Delay Analyser

Indicated Cetane Number Analysis
AFIDA is a revolutionary development providing fully automated determination of the Indicated Cetane Number (ICN) of diesel and diesel related fuels using test method IP 617.
The analyser uses a Constant Volume Combustion Chamber (CVCC) and incorporates a unique and patented high pressure injection system that generates fine fuel droplets similar to modern common rail injectors in most diesel engines.

SPECIFICATIONS
Chamber temperature 580°C
Chamber pressure 17.5 bar
Injection pressure 1000 bar
Compressed air 20.9 ± 0.5 % O2
Sample volume Approx. 40mL for analysis and cleaning
Warm up time approx. 45 min
Analysis time approx. 25 min per sample
Size (DxHxW) 1300 mm x 800 mm x 600 mm
Weight (excluding platform) 160 kg 100 kg(excluding platform)

AvCount Lite Particle Counter

The AvCount Lite particle counter provides reliable results for determining the particle concentration in liquid fuels and oils, including aviation fuel cleanliness to Defence Standard 91-091.
AvCount Lite can hold up to 3 test methods with custom methods created on a PC before being uploaded.

SPECIFICATIONS
Particle Size Range ISO 11171: 4µm(b) to >100µm(b)
Number of Measuring Channels 6 (15 when connected to a PC), programmable via PC
Counts Per Measurement (Max) 16.000.000 per 10ml
Sample Viscosity (Max) 68mm2/s
Sample Temperature Range 0 to 70°C
Results 600 internal, unlimited on PC
Pump Volume & Flow Rate 80ml (includes rinse cycles) for ASTM D7619 & IP 565, 20ml other
Pump Volume & Flow Rate 10ml aliquots @ 30ml/min or timed
Total Sample Volume Used (typ) 80ml (includes rinse cycles) for ASTM D7619 & IP 565, 20ml other methods
Size (HxWxD) 250 x 330 x 150mm
Weight 9kg

In-line Conductivity Sensor FMc ATEX Ex Certified (D2 JF-1A)

An inline system that provides real time measurement of conductivity in pipelines using high accuracy AC measurement technology according to ASTM D2624.
The system can be connected to a refinery/terminal management system to provide an automatic and continuous record of product conductivity levels, eliminating the requirement for manual sampling and record keeping.
When installed with an automatic dosing system the in-line sensor allows automated additive dosing to maintain the conductivity within specified limits.

SPECIFICATIONS
Range 0 to 1000 pS/m to 0 to 2000 pS/m
Accuracy +/-2 pS/m (+/-2% of reading)
Pressure 16 bar max pressure
Temperature range -20º to 60ºC/-4º to 140ºF, Accuracy +/-0.5°C
Resolution 0.1 pS/m
Sensor Type 316 SS Coaxial Electrode
Calibration Internal Source Zero and Scale
Certification ATEX Ex II2G EExd [ia] IIC T4 FM/FMc I.S. Probe for Class 1, Division 2 GP ABCD, T3C @ Ta = 60°C

Jet Fuel Conductivity Meter (D2 JF-1A-HH model)

The Seta D2 Hand Held Conductivity Meter (D2 JF-1A-HH model) meets the requirements of ASTM D2624.
It provides an accurate and rapid conductivity measurement of distillate fuels; and is specifically designed for testing low conductivity fluids such as aviation kerosene.

SPECIFICATIONS
Conductivity Range 0-2000 pS/m (contact factory for optional ranges)
Conductivity Accuracy +/-1.5 pS/m (+/-1.5% of reading)
Conductivity Resolution 0.1 pS//m
Temperature Range 0-35°C
Operating Temperature 0-75°C
Temperature Accuracy ±0.05°C
Temperature Resolution 0.1°C
Power Built-in 2.6AHr Lithium Ion Battery (1000 samples) Sample Trend Line Graph to Assist Data Collection
Outputs 128×64 Dot Matrix Display Indicating Conductivity and Temperature
Conductivity Sensor 316 SS Coaxial Electrode K = .02
Temperature Sensor Platinum RTD NIST Traceable Calibration
Materials Housing Polyamide Sensor 316SS and PEEK
Size (HxWxD) 310 x 110 x 100 mm
Weight 0.5kg

Seta Oil Test Centrifuge - 4 place

The Seta Oil Test Centrifuge is a heating centrifuge fitted with a rotor head with four universal pivoting buckets.
The centrifuge is used to determine water and sediment in oils.
The rotation speed, temperature, acceleration rate and time are set using the control panel. Test parameters can be saved as a program and recalled quickly

SPECIFICATIONS
Maximum Relative Centrifugal Force (RCF) 2210g
Maximum Rotational Speed 3000 rev/min
Timer Range 10 seconds to 1 hour (10 second steps) 1 hour to 99 hours 59 minutes (1 minute steps) Continuous running until manually stopped
Control Microprocessor with 99 memory capacity
Capacity 4 Samples
Voltage range 230 V, 50/60 Hz (Optional transformer for 110/120V)
Power 950 W
Size (HxWxD) 410 x 560 x 640 mm
Weight 72.5kg

WATER SEPARABILITY IN LUBRICANTS

The Herschel Emulsifier is a compact and efficient benchtop instrument designed to measure the ability of petroleum oils and synthetic fluids to separate from water.
The instrument incorporates 4 test stirrers, with independent control and motorised raising and lowering.
Samples can be tested simultaneously or individually to suit laboratory requirements.

SPECIFICATIONS
Bath Volume 5 litres
Bath Liquid Water or white oil
Sample Size 40ml oil, 40ml distilled water, 1% sodium chloride solution or synthetic seawater
Temperature range 54°C and 82°C
Bath Temperature Stability ±1°C
Stirrer Speed 1500±15 rpm
Voltage 110/240 V, 50/60 Hz, Autosensing Universal PSU
Display LCD Touchscreen
Size (HxWxD) 890 x 450 x 450 mm
Weight 49.5 kg

FIJI JF - FAME in Jet Instrument

IP 583 | ASTM D7797 – Determination of the fatty acid methyl esters (FAME) content of aviation turbine fuel (AVTUR) with fourier transform infrared spectroscopy (FTIR) – Rapid screening method
The patented Fame In Jet Instrument (FIJI) has been developed to offer the industry a rapid and easy check on parts per million (ppm or mg/kg) levels of FAME in aviation fuel using test method IP 583.
FIJI uniquely utilises state of the art Fourier Transform Infrared Spectroscopy (FTIR) technology and a patented sample preparation system which allows FAME detection accuracy down to the 10mg/kg level.

SPECIFICATIONS
Measurement range 10-150 ppm (mg/kg) FAME in Aviation Turbine Fuels
Test duration 20 minutes
Sample size 50 ml
Operating temperature range 5 to 35°C maximum (80% RH)
Power 50 W maximum
Voltage 100/250 V, 50/60 Hz
Size (HxWxD) 550 x 380 x 420 mm
Weight Approx 20 kg

WSI Analyser

The Water Separation Instrument is a fully automatic and compact bench top / portable instrument.
The instrument measures how effectively a fuel sample releases entrained and emulsified water when pumped through a water coalescing filter.
The WSI displays the measured water separation index. Results can range from 0.0 to 100.0. A high water separation index, such as 100.0, indicates the test specimen coalesces easily and is relatively free of surfactants.

SPECIFICATIONS
Measurement Range 50-100 Water Separation Index (WSI)
Conductivity 0-2000 pS/m (factory option)
Temperature Range 19°C to 29°C
Sample Size 220 ml ±10 ml
Power Universal, AC 85-264 VAC 50/60 Hz
Outputs USB, Digital Display, FAT Compatible files
Size (HxWxD) 380 x 310 x 350 mm
Weight 8 kg

Salt in Crude Analyser

The Seta Salt-in-Crude Analyser is a robust and portable instrument for determining the chloride (salt) content of crude oils in full conformity to ASTM D3230, IP 265 and equivalent test methods.
The Seta Salt-in-Crude Analyser is pre-calibrated and automatically displays salt concentration measurements in g/m3 or lbs/1000bbl (pounds per thousand barrels), this avoids the need to mix salt calibration standards and makes testing a simple and fast procedure.

SPECIFICATIONS
Conductivity range 0.0 to 151 lbs/1000bbl (Res: 0.1 lbs/1000bbl)
0.0 to 430.0 g/m3 (Res: 0.1 g/m3)
Temperature range -20º to 150ºC (res: 0.1ºC)
Power 9 volt dc battery or mains adaptor (110/120/220/240V, 50/60Hz adaptor supplied)
Size (HxWxD) 200 x 70 x 35 mm
Weight 1.6 kg

H2S Analyser

IP 570 – Determination of Hydrogen Sulfide in Fuel Oil – Rapid Liquid Phase Extraction Method
The H2S Analyser was originally developed in cooperation with Lloyd’s Register’s ‘Fuel Oil and Bunker Analysis Service’ (FOBAS) along with support of other major international oil companies to offer rapid measurement of H2S in liquid petroleum products.


PD 1120 CC

Fully-automatic system for the determination of the equilibrium boiling point of engine coolants conforming to ASTM D1120 and brake fluids according to SAE-J1704 and other standards.

SPECIFICATIONS
Test methods Reflux boiling point (ASTM-D1120), equilibrium reflux boiling point (SAE-J1704), SAE-J1703
Touch screen 7’’ touchscreen display
Printer Automatic Printout of result
Measurement time approx. 8-15 minutes
Sensor Optical Sensor System
Others Possibility  to control optional cryostat (USB/ RS232/ Ethernet)

PETRODIST 300 S semi automatic

The new improved compact design includes an automatic detection of the initial boiling point (IBP) as well as quick connections for parts to be removed after operation.
The distillation is performed from the Initial Boiling Point (IBP) to the End Boiling Point (EBP) by the operator.
The criteria for a distillation end are: the EBP in AET-temperature is exceeded, the distillate volume is exceeded, the maximum limits of heating bath temperature or flask temperature are exceeded, product cracking in the flask and vacuum loss.

SPECIFICATIONS
Available flask sizes 500 mL
Flask charge 200 mL
Max. flask temperature 400° C (750° F)
Max ambient temperature 25° C
Operating pressure vacuum down to 1 Torr
Mains supply 208 – 250 V, 50 Hz (60 Hz upon request)
Power consumption 3500 W (without options)
Dimensions (w x h x d) approx. 0.65 x 0.98 x 0. m

PETRODIST 300 M manual boiling analysis

Manual boiling analysis system according to ASTM D-1160.
The charge, depending on the distillate receiver temperature, has to be filled in the flask.
The distillation is performed from the Initial Boiling Point (IBP) to the End Boiling Point (EBP) by the operator.

SPECIFICATIONS
Flask sizes 500 mL
Charge quantity 200 mL
Boiling range max. 600°C AET (depending on product)
Operating temperature max. 400°C
Operating pressure 1 mmHg
Mains supply 208 – 250 V, 50 Hz (60 Hz upon request)
Power consumption approx. 3.5 kW
Dimensions (w x h x d) approx 0.65 x 0.96m x 0.64

PETRODIST 300 CC – F fully autom. crude oil distillation

Fully automatic crude oil distillation system, processor controlled according to ASTM D-1160 but with automatic fraction collector for the determination of boiling ranges of crude oil products under vacuum. The system can be operated in strict accordance to the ASTM procedure with 1 single receiver or alternatively, by using the automatic fraction collector, with 4 receiver.

SPECIFICATIONS
Flask sizes 500 mL
Flask charge 200 mL
Operating temperature Up to 400° C
Final cut temperature up to 600° C AET
Max ambient temperature 25° – 30° C
Fraction collector 4 calibrated receivers, 200 mL each
Operating pressure vacuum down to 0,1 Torr
Mains supply 3 x 208 – 250 V, 50 Hz (60 Hz upon request)
Dimensions (w x h x d) 0.65 x 0.65 x 1,41 m

QUICKDIST 500 CC

Specially developed for the separation of hydrocracked or catalyst product samples into their different cuts (for example: Naphtha, Kerosene, Diesel).
The unmatched timeframe of less than three hours is achieved in a fully automatic process through different pressure stages similar to ASTM-D2892.

SPECIFICATIONS
Operation temperature (flask) max. 350°C
Final Cut point (AET) max. 420°C
Operation pressure ATM – 1 Torr abs
Column efficiency up to 30 theoretical plates
Flask Sizes 500ml, 1 L, 2 L
Charge up to 60% of flask volume
Receiver size 20x 100ml

PETRODIST ® 1 00 CC

The system measures online the volume of each fraction before each cut is being discharged into an automatic fraction collector with 20 receivers.
The fraction collector is equipped with an inbuilt electronic balance to measure the weight of each fraction.
By replacing filled receivers the system can handle up to 80 cuts for the distillation of one sample.
The receiver change is performed according to pre-selected cut temperatures or when a receiver is filled up to continue the cut sampling in the next receiver (to avoid over filling of the receiver).

SPECIFICATIONS
The system is computer controlled and designed for fully automatic operation throughout the different distillation runs at different pressure levels which includes:
debutanization
run at atmospheric pressure
run at vacuum 100 Torr
run at vacuum 10 Torr
run at vacuum 2 Torr
The system can optionally be equipped with an online density measurement system.
Rhe system requires for operation water, nitrogen, compressed air and electricity to be supplied by lab infrastructure.

PETRODIST 100 S semi-automatic

Crude oil distillation system for semi-automatic operation exactly according to ASTM D-2892 (TBP).
The system is designed for automatic operation within each of the following distillation runs: Debutanization,
1. run at athmospheric pressure,
2. run at vacuum 100 Torr,
3. run at vacuum 10 Torrand
4. run at vacuum 2 Torr.

SPECIFICATIONS
microprocessor controlled, based on multifunctional serial bus system
PC with windows based operation and evaluation software
continuous monitoring of distillation process
flask heater control by differential temperature, differential pressure, power regulation or preselected fixed temperature
all distillation parameters can be exactly and reproducibly selected
automatic receiver change by preselected cut temperatures
debutanization process manually
cooling down process manually after each run
precise vacuum control

PETRODIST 100 M manual

Petrodist 100 M is a computer controlled crude oil distillation system for semi-automatic operation according to ASTM D-2892.
The system is designed for automatic operation of the individual distillation stages, the fraction changes resp.
the receiver changes are automatically carried out according to pre-selected boiling temperature or when the receivers are filled up.
The vacuum-tight fraction collector contains 9 receivers. The receiver volume is related to the flask size.

SPECIFICATIONS
The installation requires water, nitrogen, compressed air and electricity
max. 36 fractions can be obtained with the usual 4 distillation stages

PETRODIST 500 Q semi-automatic operation

The system can be operated alternatively with fraction collector or with the
intermediate receiver for larger cut volumes as well as the determination of the actual distillation rate. Both collection systems are included in the scope of supply.

SPECIFICATIONS
bench scale crude oil distillation system for semi-automatic operation
quick distillation of small crude oil charges
approx. 2 hrs. for complete distillation (depending on crude oil)
fraction collector for automatic or manual operation
operation stages follow ASTM D-2892: ATM, 100 torr, 10 torr, 2 torr
column efficiency similar to ASTM D 2892

PETRODIST 400 S semi-automatic combination system

The PETRODIST 400 S is a combination system for alternative operation of the following systems of Petrodist 100 S and Petrodist 200S.
The central fraction collector is used for both PETRODIST 100 S as well as PETRODIST 200 S.
The vacuum supply, the cryostat/ thermostat and the control station are also used for both systems. The unit requires water, nitrogen, compressed air and electricity.
Dry ice or liquid nitrogen is required for cold traps. The cuts are taken automatically according to the pre-selected boiling temperature or when the receivers are filled up.
The vacuum tight fraction collector contains 9 receivers.

SPECIFICATIONS
Equipment for ASTM D-2892(PD100)
Available flask sizes 2, 4, 6, 10, 20 L
Operating pressure vacuum down to 1 Torr
Operating temperature up to 350° C (660° F)
Final cut temperature up to 565° C AET (1050° F)
Equipment for ASTM D-5236 (PD200)
Available flask sizes 2, 4, 6, 10, 20 L
Operating pressure vacuum down to 0.1 Torr
Operating temperature up to 400° C (750° F)
Final cut temperature up to 565° C AET (1050° F)
Common data
Receiver capacity 12 x 500 ml
Max ambient temperature 25° C
Mains supply 3 x 208 – 250 V, 50 Hz (60 Hz upon request)
Power consumption 8000 W (without options)
Dimensions (w x h x d) approx. 2.30 x 2,90 x 0.90 m

PETRODIST ® 400 CC

Processor controlled combined crude oil distillation system for fully automatic operation according to ASTM D-2892 (TBP) and ASTM D-5236 (Potstill). PETRODIST 400 CC is a combination of the following systems:
1. PETRODIST 100 CC – 20 L flask size (ASTM D-2892)
2. PETRODIST 200 CC – 6 L flask size (ASTM D-5236

SPECIFICATIONS
The installation requires water, nitrogen, compressed air and electricity
The system enables to perform TBP- and Potstill – distillations of various crude samples according to ASTM-standards and is designed for laboratory use
The unit requires water, nitrogen, compressed air and electricity. Dry ice or liquid nitrogen is required for cold traps

PETRODIST 200 S semi automatic

Crude oil distillation system for semi automatic operation according to ASTM D-5236 (Standard Test Method for Distillation of heavy Hydrocarbon Mixtures, Vacuum Potstill Method).

SPECIFICATIONS
Flask sizes 2, 4, 6, 10, 20L
Receiver capacity 9 x 500 ml
Operating temperature up to 400° C (750° F)
Final cut temperature up to 565° C AET (1050° F)
Max ambient temperature 25° C
Operating pressure vacuum down to 0.1 Torr
Power consumption 5000 W (without options)
Dimensions (w x h x d) 1.40 x 2.20 x 0.90 m
Power supply 3 x 208 – 250 V, 50 Hz (60 Hz upon request)

PETRODIST 200 CC fully automatic

The new design specifically highlights the high viscous residues that are being processed in this system by guaranteeing a continuously operating tempered discharge into an open fraction collector with automatic and precise weight measurement.
Processor controlled crude oil distillation system for fully automatic operation according to ASTM D-5236 (Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures, Vacuum Potstill Method).

SPECIFICATIONS
Flask sizes 2, 4, 6, 10, 20 L
Receiver capacity 12 x 500 ml or 1000 ml
Operating temperature up to 400° C (750° F)
Final cut temperature up to 565° C AET (1050° F)
Operating pressure vacuum down to 0.1 Torr
Mains supply 3 x 208 – 250 V, 50 Hz (60 Hz upon request)
Power consumption 5000 W
Dimensions (w x h x d) 1.81 x 2.03 x 0.87 m

PETRODIST 200 HV Distillation acc. ASTM D-5236

Processor controlled crude oil distillation system for automatic operation following ASTM D-5236 for distillation up to a final temperature of 600° C AET

SPECIFICATIONS
The PC-based PILODIST- process control system includes control of heating and vacuum as well as the display and storage of all important process values:
Temperature of heating bath (PT 100)
Temperature of product in flask (PT 100)
Temperature of vapor (PT 100)
Pressure of distillation (0-100Torr)
The atmospheric and equivalent temperature is calculated and visualized automatically