Products

image

PETRODIST 400 S semi-automatic combination system

The PETRODIST 400 S is a combination system for alternative operation of the following systems of Petrodist 100 S and Petrodist 200S. The central fraction collector is used for both PETRODIST 100 S as well as PETRODIST 200 S. The vacuum supply, the cryostat/ thermostat and the control station are also used for both systems. The unit requires water, nitrogen, compressed air and electricity. Dry ice or liquid nitrogen is required for cold traps. The cuts are taken automatically according to the pre-selected boiling temperature or when the receivers are filled up. The vacuum tight fraction collector contains 9 receivers.

  • Specifications
  • Test Methods
  • Downloads
  • In Action
  • Equipment for ASTM D-2892 (PD100)
  • Available flask sizes: 2, 4, 6, 10, 20 L
  • Operating pressure: vacuum down to 1 Torr
  • Operating temperature: up to 350° C (660° F)
  • Final cut temperature: up to 565° C AET (1050° F)
  • Equipment for ASTM D-5236 (PD200)
  • Available flask sizes: 2, 4, 6, 10, 20 L
  • Operating pressure: vacuum down to 0.1 Torr
  • Operating temperature: up to 400° C (750° F)
  • Final cut temperature: up to 565° C AET (1050° F)
  • Receiver capacity: 12 x 500 ml
  • Max ambient temperature: 25° C
  • Mains supply: 3 x 208 – 250 V, 50 Hz (60 Hz upon request)
  • Power consumption: 8000 W (without options)
  • Dimensions (w x h x d): approx. 2.30 x 2,90 x 0.90 m
  • Available Test Methods: ASTM D-2892 (TBP) ASTM D-5236 (Potstill)
layer-ic Download Brochure

To view our full range of products, download our latest Product Profile here.

  • Lorem Ipsum